Page 59 - Sleer - Rev 1.98

smart lighting
PRODUCT the result

One of the drawbacks of a single central system is the required expensive infrastructure. For each
In smart lighting systems, 95% of the world productions are implemented and produced in a single way lighting unit separate Electrical wiring and conduits of the connection is needed, which increases the
as a centralized system. In other words, the smart device is centrally located at the center of a residential prime cost and prolongs the project completion time.
or commercial unit and is then wired to each single lamp.
Moreover, the price of the central unit goes up based on the number of
Although this method is not satisfactory enough, companies are not looking for any change to improve outlets, and worst of all, if the central system is in problem, the entire
it. Nonetheless, to solve this problem, our company offered a separate device for each part of the lighting system shall be switched off until the defect is eliminated. How-
residential unit. ever, in our smart zoning system, if the device fails, the faulty part turns
In this way, each room is considered as a distinct central part of the unit with many controllable features. off, but the lighting on the rest of the unit continues to work. Of course,
Please note that if our device fails for whatever reason, you will never
stay without lighting, because it is working in parallel.

challenge

After several years of manufacturing and installing this smart lighting system, based on the estimates
made by the research team, it was concluded that this system still requires further modifications. As
such, a new generation of smart lighting emerged. In this new version, the previous features were
incorporated into the conventional wall-mounted light switches, and the dimming ability was added
to its previous features. Dimmer switches are great options, with many features and unique design
mounted on the walls. With the introduction of these switches, the lighting system was increasingly
used in residential units.

Another advantage of the dimmer switches was that it had no electrical leakage at the output and was
also highly resistant to short circuit. When comparing this system with similar ones from other brands,
we noticed that in similar products the device is controlled only via the switch mounted on the wall
While for using such these switches, each one has to be separately connected to the central device
through wiring. Hence, our company has provided very narrow light switches equipped with the radio
technology which can be installed anywhere on the wall with no need for the infrastructure. Most im-
portantly, the battery required for this device should have a high lifespan, with the system being able
to extend the battery life to 6 years, and until the expiry date of the battery life, the smart keys are
supposed to be working. Having introduced this system, we extended the battery lifespan to 6 years.

what we did

By increasing the number of bridges to 6, we launched several global protocols at 5 * 12 * 2.5 dimen-
sions. The advantage of using these dimensions is that there is no need to use electric box. In this
way, everywhere a bunch of wire is located, the device can be easily installed. Several global protocols
The battery lifespan to 6 years The switches were available in two, four, and six bridges, but remained
standard as the lighting device in the overall dimensions and design.

58 SLEER www.sleer.nl 59